FX2N-20MR-2AD1DA Mitsubishi PLC (Clone) industrial control board
Software: GX Works2 , GX Developer
Power supply voltage: 18V-28V <1A
Program capacity: 8000
Digital input: 12 (Sourcing Input,0V Active,NPN Sensors)
Digital output: 8 NPN(RELAY)
Analog input: 2 (0-10V) (0-4095) (D8030=AD0 , D8031=AD1)
Analog output(PWM): (0-1000KHZ) (0-1000) (D8033=PWM OUT)
A-B Phase Counters are not support.
Communication: 9600 baud rate,USB to RS232 Serial Program download and HMI Display Communication support
Package: PLC FX2N Board x 1
Program download cable x 1
Program encryption and de-cryptographic methods Two encryption methods:
1. Normal encryption
2. Super encryption
Online one> Login keyword one> New login one> Change, if set to 88888888, you can not change the password to cancel the password: Online 1>Login keyword>Cancel, if it is set to 88888888, you can no longer change the password
Online one> Login keyword one> New login one> Change, after setting 88888888, you can no longer read the PLC program, and can no longer Cancel or change the password, only download the program to the controller.
If you want to cancel the password, you can clear the memory and password by clearing the PLC memory:
if the password is forgotten, or if the super encryption needs to be restored to the normal state, you can pass;
Online one>Clear PLC memory>PLC memory>Execution
Note: This operation will cause the ladder program to be completely deleted.